Aluminum chip fracture cover of easy open end refers to the basic cover sheet to cover a small punch, chuck, wall or thimble etc. are less than 10mm length of short line indentation, resulting in filling drinks after the formation of the leakage problem in pressure.

This is due to fluctuations in the peripheral dimensions of aluminum. The aluminum sheet may occasionally occur and cover punch die alignment error in basic cover punch feed process, then on the corner of aluminum to produce short fine chip. The chips adhere to the mold, and when the subsequent aluminum material enters the mold to punch the base cap, the aluminum chip adhered to the mold will crush these basic covers. After several stroke, the aluminum chip on the mold will be taken away, and the back of the basic cover stamping will be restored to normal, no longer pressure problems.

The cover sheet of aluminum scraps crushed (crack) cover usually leads to leakage and drink can become low liquid level tank, so that the problem can often be identified in cans filling line, from flowing into the finished beverages, few opportunities. Even if there is basically no need to worry about, but just to be on the safe side, it is recommended that arrangements for the occurrence of the problem before and after the period of time, a small amount of finished drinks for isolation, review and confirmation.

Dongguan Anlian Packing Products Co., Ltd who is a company combined with production, research and development, is specializes in producing safety easy open end. We offer beverage easy open lid, aluminum easy open peel off end,tinplate easy open lid, which is suitable for different iron can, aluminum can, composite pot and PET can. We warmly welcome new and old customers visit website: http://www.519020.cn or contact us through the phone number: 0769-230388455 or 18688680037.